|
 |
| Rubber, plastics, pigments, paint, magnetic materials, cosmetics, medicines, foods etc. |
With the new blade structure and the flexible clearance, even high-viscosity materials can be kneaded swiftly.
Low-temperature kneading and high dispersion, achieving high uniform quality. |
TK300-100M type
|
TK5-2M type
|
Easy cleaning of the Mixing Chamber
DX type Kneader with Dismountable Mixing Chamber |
The hydraulic cylinder enables the Mixing Chamber to be automatically dismounted.
Unlike the standard kneaders, inner parts can also be easily cleaned.
Applicable to the materials that cannot be discharged smoothly.
Prevents the mixing of impurities when changing the compound.
Easy replacement of the blades.
The available types are 3 liter, 6 liter, 10 liter, 20 liter and 25 liter of mixing quantity. |
|
The shaft seal is easily cleaned.
Mechanical Seal Hydraulically Removed and Attached |
The shaft seal of the blades can be removed and attached by the hydraulic cylinder.
The shaft seal can be removed by simply touching a button. Easy cleaning. Completely shielded from impurities. |
|
 |
Mixing Quantity
( liter)
|
Type
|
Total Capacity
( liter) |
Motor for blades
(kw) |
Dimensions
(length x width x height)(mm) |
1 |
TK1-1M |
3 |
0.75 |
645×710×1100 |
2 |
TK2-2M |
5 |
1.5 |
830×1190×1120 |
5 |
TK5-2M |
12 |
1.5 |
1544×640×990 |
15 |
TK15-7.5M |
40 |
5.5 |
1800×1150×1000 |
25 |
TK25-7.5M |
55 |
5.5 |
1800×1200×1400 |
50 |
TK50-20M |
75 |
15 |
|
100 |
TK100-50M |
200 |
37 |
3240×2000×1600 |
200 |
TK200-75M |
400 |
55 |
3240×2000×1650 |
300 |
TK300-100M |
500 |
75 |
3750×2140×1800 |
400 |
TK400-150M |
600 |
110 |
3300×2220×2100 |
500 |
TK500-150M |
750 |
110 |
3860×2220×2000 |
600 |
TK600-150M |
900 |
110 |
3860×2500×2000 |
800 |
TK800-200M |
1200 |
150 |
4400×2850×3000 |
1000 |
TK1000-200M |
1500 |
150 |
4550×2850×3000 |
1200 |
TK1200-200M |
2000 |
150 |
6450×2900×3100 |
1500 |
TK1500-200M |
2500 |
150 |
4850×3010×3500 |
2600 |
TK2600-400M |
5000 |
300 |
5540×3600×4470 |
|
Types of 2600 liter or above are also available.
The specifications and the design are subject to change without notice.
The dimensions are for reference only. These dimensions may vary depending on the specifications. |
|
|
 |
| * |
Touch panel |
| * |
Many Wing blades |
| * |
Surface coating of the Mixing Chamber (Nitriding process, thermal spraying, plating, non-adhesive) |
| * |
Heater heating system |
| * |
Jacket water temperature adjustment unit |
| * |
Blade rotation brake |
| * |
Mechanical seal hydraulically removed and attached. |
For more information |
 |
|
|
