|
 |
| Rubber, ceramics (MIM), metallic particles (MIM), plastics, magnetic materials, pigments, paint, cosmetics, foods etc |
Using the blades specially configured and the flexible clearance, high viscosity materials can be swiftly kneaded.
Kneading at low temperature, high dispersion and uniform quality are achieved. |
TDS75-150MB type
|
TDS150-200MB type
|
|
 |
| THM type Hybrid Mixer equipped with the most advanced technology |
This mixer is equipped with every advanced technology.
The kneading program and data are controlled through use of the touch panel.
Also, this mixer has Many Wing (two blades or more) mechanism.
The THM type Hybrid Mixer is available as trial device.
INVITATION TO TRIAL |
Easy cleaning of the Mixing Chamber
DX type Kneader with Dismountable Mixing Chamber |
The hydraulic cylinder enables the Mixing Chamber to be automatically dismounted.
Unlike the standard kneaders, inner parts can also be easily cleaned.
Applicable to the materials that cannot be discharged smoothly.
Prevents the mixing of impurities when changing the compound.
Easy replacement of the blades.
The available types are 3 liter, 6 liter and 10 liter of mixing quantity. |
|
Stable kneading
Dispersion Mixer with 4 Pillars |
The pressurized kneader corresponds to every type of automatic feeder, enabling the material to be conveyed into the tank from every direction.
Stable kneading is achieved! |
The shaft seal is easily cleaned.
Mechanical Seal Hydraulically Removed and Attached |
The shaft seal of the blades can be removed and attached by the hydraulic cylinder.
The shaft seal can be removed by simply touching a button. Easy cleaning. Completely shielded from impurities. |
|
 |
Mixing Quantity
( liter) |
Type
|
Total Capacity
( liter) |
Motor for blades
(kw) |
Dimensions
(length x width x height)(mm) |
0.3 |
TD0.3-3M |
0.9 |
2.2 |
860×1020×1860 |
1 |
TD1-5M |
3 |
3.7 |
950×1300×1760 |
3 |
TD3-10M |
9 |
7.5 |
1310×1320×2300 |
10 |
TD10-20M |
20 |
15 |
1700×1800×2850 |
20 |
TD20-40M |
50 |
30 |
2480×1400×2750 |
35 |
TDS35-100MB |
80 |
75 |
2900×1800×3360 |
40 |
TDS40-120MB |
90 |
90 |
|
55 |
TDS55-100MB |
125 |
75 |
3500×1800×3550 |
TDS55-125MB |
90 |
75 |
TDS75-125MB |
175 |
90 |
3680×2250×3600 |
TDS75-150MB |
110 |
TDS75-215MB |
160 |
3765×2300×3600 |
110 |
TDS110-200MB |
250 |
150 |
3850×2440×3770 |
TDS110-300MB |
225 |
150 |
TDS150-200MB |
300 |
150 |
4000×2650×3780 |
TDS150-300MB |
225 |
200 |
TDS200-300MB |
440 |
225 |
6400×2310×4950 |
TDS200-500MB |
375 |
300 |
TDS300-600MB |
700 |
450 |
6420×2310×5000 |
|
The specifications and the design are subject to change without notice.
The dimensions are for reference only. These dimensions may vary depending on the specifications. |
|
|
 |
| * |
Touch panel |
| * |
Many Wing blades |
| * |
Surface coating of the Mixing Chamber (Nitriding process, thermal spraying, plating, non-adhesive) |
| * |
Heater heating system |
| * |
Jacket water temperature adjustment unit |
| * |
Blade rotation brake |
| * |
Mechanical seal hydraulically removed and attached. |
For more information |
 |
|
|
